First, identify the left and right earbuds by the L and R markings, then place them into their respective slots in the case.
Next, look at the two wires coming from the earbuds; one has a remote control and the other doesn't.
Take the wire from the left earbud and guide it through the left-side cable management slot.
Then, pull that same left wire down through the top notch in the case to position it correctly.
After handling the left side, do the same with the right earbud wire, routing it through the right slot.
Pull the right wire down through the top notch as well, ensuring the remote control part sits in the center groove.
Once the wires are routed, wrap the remaining cable in one direction into the circular groove.
Finally, gently close the lid of the case to complete the process.